46 warshavskoe shosse. moscow 115230 ? russia , ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru copyright 2012. rmt ltd. the design and speci?ations of products can be changed by rmt ltd without notice. page 1 of 8 manufacturing options performance parameters dimensions 1mdl06-050-xxt performance data are given for 300k, vacuum a. tec assembly: a. tec assembly: c. ceramics surface options: c. ceramics surface options: c. ceramics surface options: d. thermistor (optional) d. thermistor (optional) * 1. solder snsb (t melt =230?) 1. blank ceramics (not metallized) 1. blank ceramics (not metallized) can be mounted to cold side 2. solder ausn (t melt =280?) 2. metallized (au plating) 2. metallized (au plating) ceramics edge. calibration is 3. metallized and pre-tinned with: 3. metallized and pre-tinned with: available by request. b. ceramics: b. ceramics: 3.1 solder 117 (in-sn, t melt =117?) e. terminal contacts e. terminal contacts * 1.pure al 2 o 3 (100%) 3.2 solder 138 (sn-bi, t melt = 138?) 1. blank, tinned copper 2.alumina (al 2 o 3 - 96%) 3.3 solder 143 (in-ag, t melt = 143?) 2. insulated wires 3.aluminum nitride (aln) 3.4 solder 157 (in, t melt = 157?) 3. insulated, color coded * - used by default * - used by default 3.5 solder 183 (pb-sn, t melt =183?) 3.6 optional (speci?d by customer) thermoelectric cooling solutions type t max k q max w i max a u max v ac r ohm h mm 1mdl06-050-xxt (n=50) 1mdl06-050-xxt (n=50) 1mdl06-050-xxt (n=50) 1mdl06-050-xxt (n=50) 1mdl06-050-xxt (n=50) 1mdl06-050-xxt (n=50) 1mdl06-050-xxt (n=50) 1mdl06-050-03t 68 18.91 5.2 6.3 0.89 0.9 1MDL06-050-05T 71 12.18 3.3 6.3 1.44 1.1 1mdl06-050-07t 72 8.97 2.4 6.3 1.98 1.3 1mdl06-050-09t 72 7.10 1.9 6.3 2.53 1.5 1mdl06-050-12t 73 5.41 1.4 6.3 3.35 1.8 1mdl06-050-15t 73 4.37 1.1 6.3 4.17 2.1
46 warshavskoe shosse. moscow 115230 ? russia , ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru copyright 2012. rmt ltd. the design and speci?ations of products can be changed by rmt ltd without notice. page 2 of 8 performance data 1mdl06-050- 03t performance data 1mdl06-050- 05t thermoelectric cooling solutions @ 27?, vacuum tmax k qmax w imax a umax v 1mdl06-050-03t 68 18.91 5.2 6.3 @50?, n2 tmax k qmax w imax a umax v 1mdl06-050-03t 74 20.64 5.2 6.9 note : performance data is specified at optimal conditions (tec hot side is stabilized at ambient temperature). heatsink thermal resistance is not included into estimations. use teccad software for estimations under different conditions. @ 27?, vacuum tmax k qmax w imax a umax v 1MDL06-050-05T 71 12.18 3.3 6.3 @50?, n2 tmax k qmax w imax a umax v 1MDL06-050-05T 77 13.28 3.3 6.9 note : performance data is specified at optimal conditions (tec hot side is stabilized at ambient temperature). heatsink thermal resistance is not included into estimations. use teccad software for estimations under different conditions.
46 warshavskoe shosse. moscow 115230 ? russia , ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru copyright 2012. rmt ltd. the design and speci?ations of products can be changed by rmt ltd without notice. page 3 of 8 performance data 1mdl06-050- 07t performance data 1mdl06-050- 09t thermoelectric cooling solutions @ 27?, vacuum tmax k qmax w imax a umax v 1mdl06-050-07t 72 8.97 2.4 6.3 @50?, n2 tmax k qmax w imax a umax v 1mdl06-050-07t 78 9.79 2.4 6.9 note : performance data is specified at optimal conditions (tec hot side is stabilized at ambient temperature). heatsink thermal resistance is not included into estimations. use teccad software for estimations under different conditions. @ 27?, vacuum tmax k qmax w imax a umax v 1mdl06-050-09t 72 7.10 1.9 6.3 @50?, n2 tmax k qmax w imax a umax v 1mdl06-050-09t 78 7.75 1.9 6.9 note : performance data is specified at optimal conditions (tec hot side is stabilized at ambient temperature). heatsink thermal resistance is not included into estimations. use teccad software for estimations under different conditions.
46 warshavskoe shosse. moscow 115230 ? russia , ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru copyright 2012. rmt ltd. the design and speci?ations of products can be changed by rmt ltd without notice. page 4 of 8 performance data 1mdl06-050- 12t performance data 1mdl06-050- 15t thermoelectric cooling solutions @ 27?, vacuum tmax k qmax w imax a umax v 1mdl06-050-12t 73 5.41 1.4 6.3 @50?, n2 tmax k qmax w imax a umax v 1mdl06-050-12t 78 5.91 1.4 6.9 note : performance data is specified at optimal conditions (tec hot side is stabilized at ambient temperature). heatsink thermal resistance is not included into estimations. use teccad software for estimations under different conditions. @ 27?, vacuum tmax k qmax w imax a umax v 1mdl06-050-15t 73 4.37 1.1 6.3 @50?, n2 tmax k qmax w imax a umax v 1mdl06-050-15t 78 4.77 1.1 6.9 note : performance data is specified at optimal conditions (tec hot side is stabilized at ambient temperature). heatsink thermal resistance is not included into estimations. use teccad software for estimations under different conditions.
46 warshavskoe shosse. moscow 115230 ? russia , ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru copyright 2012. rmt ltd. the design and speci?ations of products can be changed by rmt ltd without notice. page 5 of 8 tec polarity terminal wires options tec polarity can be modi?d by request. the speci?d polarity in this datasheet is typical. it can be reversed in accordance to customer application requirements. the standard solution is with terminal wires. tec can be modi?d for wb process by request. in this case terminal wires are not mounted, tec has au plated wb pads. customized au patterns on thermoelectric cooler cold side are available by request. selective pre- tinning over pattern is also available. please, contact rmt ltd for additional information about customized au patterns requirements. + - + - additional options thermoelectric cooling solutions standard tec height can be modi?d without performance changes by using ceramics of different thickness. standard thermoelectric cooler height (speci ed in this datasheet) can be increased in a range +0.5..+1.5 mm by request. in case of wb optimization, the standard wb solution is with wb pads (no posts) by default. wb posts are available by request. the dimensions of wb posts can be modi?d and optimized for customers application. wb posts are made of copper, au plated. customized au patterns optimization for wb process tec height modi?ation standard polarity reversed polarity standard solution, terminal wires wb solution, au played wb pads customized au pattern on cold side selective pre-tinning over pattern standard height m o d i e d h e i g h t , another ceramics thickness wb pads wb posts
46 warshavskoe shosse. moscow 115230 ? russia , ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru copyright 2012. rmt ltd. the design and speci?ations of products can be changed by rmt ltd without notice. page 6 of 8 thermoelectric cooler overview thermoelectric cooling solutions cold side ceramics (top side) al2o3 ceramics by default (aln solution is available by request) te cooler lead free internal assembly (lead-free solder 230, sn-sb) pellets (bite posts) hot side ceramics (bottom side) terminal wires (or wb pads by request) application tips 1. never heat te module more than 200?c (tec assembled at 230?c). 2. never use te module without an attached heat sink at hot (bottom) side. 1. connect te module to dc power supply according to polarity. 2. do not apply dc current higher than imax. installation 1. mechanical mounting . tec is placed between two heat exchangers . this construction is ?ed by screws or in another mechanical way. it is suitable for large modules (with dimensions 30x30mm and larger). miniature types require other assembling methods in most cases. 1. soldering . this method is suitable for a te module with metallized outside surfaces. rmt provides this option and also makes pre-tinning for te modules. 2. glueing . it is an up-to-date method that is used by many customers due to availability of glues with good thermoconductive properties. a glue is usually based on some epoxy compound ?led with some thermoconductive material such as graphite or diamond powders, silver, sin and others. the application of a speci? type depends on application features and the type of a te module. 1 2 3 object being cooled object being cooled heatsink heatsink tec tec soldering gluing screw mounting + - tec polarity (can be modi?d by request)
46 warshavskoe shosse. moscow 115230 ? russia , ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru copyright 2012. rmt ltd. the design and speci?ations of products can be changed by rmt ltd without notice. page 7 of 8 contacts rmt ltd. headquarters warshavskoe sh. 46, 115230, moscow russia phone: +7-499-678-2082 fax: +7-499-678-2083 web: www.rmtltd.ru email: info@rmtltd.ru europe/usa - tec microsystems gmbh schwarzschildstrasse 3, 12489 berlin germany tel. +49 30 6789 3314 fax+49 30 6789 3315 web: www.tec-microsystems.com email: info@tec-microsystems.com china - protec ltd.
8u ?? j??? b 2 207 +86-755-61596066
+86-755-61596036 518054 web: www.protecltd.com email: info@protecltd.com thermoelectric cooling solutions
|
